How to Replace a Shower Faucet in Singapore

Some plumbing tasks, like knowing how to replace a shower faucet, can be done independently without the help of professionals. Replacing a shower faucet is a pretty straightforward task that can be done in a few minutes. However, you will need good know-how of the replacement process to avoid any hiccups during the installation process.

Thus, we have come up with the perfect guide for the shower faucet replacement process. You only need a few plumbing tools and a little time and patience. So chin up, and let’s replace that shower faucet by following this simple guide.

Also, LS Plumber Singapore provides a step-by-step guide to replacing a shower faucet in Singapore. They have decades of experience in services like sink pipe repair, toilet bowl leaks, and toilet flush installation.

Signs That Your Water Faucet Needs Replacement

Shower faucets should be replaced every few years to ensure the shower works efficiently. However, some signs show that the faucet is damaged and should be replaced. Here are some signs you should look for to see if a replacement is needed.

1. Water Leakage

Faulty shower faucets can leak a lot of water, whether in drops or a steady stream. If you notice any such issues with the faucet, you should try to find the exact cause of the leakage. If the problem persists, replacing a shower faucet can be the only practical solution.

2. Changing Water Pressure

Another sign that shows that you should replace a shower faucet is changing water pressure during use. This can happen due to blocked water pipes or a buildup of dirt or debris within the water pipes. If you notice any changes in the water pressure during use, you should consider replacing the shower faucet.

3. Squeaky Sounds From The Faucet

If the shower faucet makes squeaky sounds or some other noise during use, chances are that there might be limescale buildup in the pipes. Replacing the shower faucet can be the only way to eliminate these noises.

How To Replace A Shower Faucet – Step-by-Step Guide

Here is the step by step guide to replace a shower faucet in Singapore.

1. Gather Your Supplies

To go about the shower replacement process, you will need some essential plumbing tools. Some essential tools you are going to need for this purpose include

Shower faucet replacement
Spanner
Plumbers tape
Bucket
Screwdriver
Towels

2. Turn Off The Main Water Supply

In the next step, you must turn off the shower faucet’s water supply. If the faucet does not have any individual water supply, you will have to turn off the supply of the bathroom from the main water supply pipes. Once the supply is off, turn on the faucet and let the water drain from the shower to release the pressure.

3. Remove The Old Shower Faucet

In the next step, you must detach the old shower faucet to replace it with a new one. To remove a shower faucet, detach the faucet handle by removing the screws under the decorative caps. Carefully remove the handle from its position and remove the trim plate. Once the trim plate has been removed, you can locate the faucet valve and remove it with the help of an adjustable wrench or a spanner.

4. Prepare The Area For The New Faucet

In the next step, you must prepare the new faucet for installation. For this purpose, wrap a few layers of threads or plumber tape around the water supply pipe to which you want to connect the new faucet. This will create a tight seal between the tap and the water pipes and prevent leakage.

5. Install The New Faucet

The next step to replace a shower tap is to put the new valve on the basin. Tighten the nuts of the valve onto the water pipes and secure it in place. Once the valve is attached, you can install the trim plate and handle. You should be careful in tightening the nuts as any extra pressure can cause damage to the tap or the pipes.

6. Connect The Water Supply And Check The Faucet

Once you have secured the faucet in its place, you can turn the main water supply on. Check the connection between the faucet and the pipes and ensure no leaks. If you notice any leaks, you can try tightening the tap some more. You can also use some extra threads or plumber tape layers to deal with persistent leaks.

Conclusion

We have discussed the complete process to replace a shower faucet tap. You just need some plumbing tools, and you are good to go. But if you still need any assistance in the process, you can seek the help of a wash basin tap service in Singapore. Many companies offer such services for a nominal fee.

Frequently Asked Questions

Can you replace just the shower faucet?

Yes, you can replace the shower faucet without replacing the entire shower system. For this purpose, you must remove the old faucet by removing the valve and the handles. Once the old shower is removed, you can install the new faucet in its place with the help of this guide.

Do you need a plumber to replace the shower fixtures?

No, you do not need a plumber to fix minor issues with shower fixtures. With the right tools and approach, you can replace old fixtures and faucets in only a few minutes. However, for more significant issues with the fixtures, you can take the help of professionals.

How to replace an old tap?

Remove the old tap by removing the valve screws, the trim plates, and the handles. Prepare the new faucet by applying some threading on the pipe. Once the new faucet is prepared, install it in place of the old one by reattaching the handles, the trim plate, and the faucet valves.