Installing a wash basin tap can enhance the total aesthetic of your bathroom. Installing them can be a hassle if you want to replace old basin taps or upgrade to new ones. But armed with the appropriate knowledge and tools, you can do this job in no time.Â
Today, we are going to discuss the whole process of installing a wash basin tap. We will tackle the whole issue from start to finish, from preparing the basin area for installation to checking for leaks in the end. So get your tools ready, and let’s get to the wash basin tap installation. If you want professional services like kitchen sink installation, shower taps installation, storage water heater installation, etc., LS Plumber Singapore is the best option for you.
Install a Wash Basin Tap – Step By Step GuideÂ
Here are the steps you are going to follow when installing a wash basin tap:
1. Prepare The Basin Tap Area
This is the first step to installing a wash basin tap. By preparing, we mean cleaning the area of any dirt or debris. You should also remove any other impurities that might hinder the installation process. After cleanup, turn off the water supply to the basin tap that needs repairing. For this purpose, you can close your house’s main water supply from the storage unit. But you can also close the water supply from the shut-off valve under the sink.
Once you shut the water supply off, drain any remaining water in the taps. Open the tap and let the water run until no more of it comes out.Â
2. Remove The Old Tap (If Present)
This step is only applicable if you are replacing any old and worn-out taps. Remove the old tap by loosening the nuts and connecting it to the basin. Once you have removed the nuts, you can easily lift the tap off the basin.Â
If you are applying new taps to a new basin, you can skip this step and move on to the next one directly.Â
3. Prepare The New Tap
If you have a new tap that requires assembly, you must prepare it before fixing it to the basin. For the assembly process, follow the guidelines provided with the tap. This process only takes a few minutes and is very easy, so you won’t have to worry about spending a lot of time on it.Â
4. Apply Threads Or Plumbers Tape
Wrap a few layers of threads or plumber tape around the water supply pipe to which you want to connect the new tap. These materials create a tight seal between the tap and the water pipes, preventing any leakage.Â
5. Install The New Tap
The next step in wash basin faucet installation is putting the new tap on the basin and aligning it with the mounting holes in the basin. Tighten the nuts of the tap onto the water pipes and secure the tap in place. You should be careful in tightening the nuts as any extra pressure can cause damage to the tap or the pipes.Â
6. Connect The Water Supply And Check The Tap
Once you have secured the tap to the basin, you can turn the main water supply on. Check the connection between the tap and the pipes and ensure that there are no leaks. If you notice any leaks, you can try tightening the tap some more. You can also use some extra layers of threads or plumber tape to deal with persistent leaks.Â
Turn the tap on and let the water run for a few minutes. Notice the flow of water and ensure that it is constant. During this process, check for leaks around the base of the tap.Â
7. Seal The Base Of The Basin
The tap can sometimes be loose at the base of the basin. This creates a gap between the basin and the tap, leading to a wobbly tap. Thus, check the base for any gaps and ensure that there aren’t any. You can use any sealant or silicone to fill in the gap and prevent any leakage or instability of the tap.Â
ConclusionÂ
We have discussed the whole process of installing a wash basin tap step by step. The job is very easy, and you can do it by yourself. You just need some plumbing tools, and you are good to go. But if you still feel that you need any assistance in the whole process, you can seek the help of a wash basin tap service in Singapore.Â