Learning to install a toilet bowl would do the trick for anyone looking to renovate their bathroom or upgrade because rates are skyrocketing, and everyone wants efficiency. This guide walks you through balancing the process, making it possible even if you are an absolute beginner. If you have the proper tools and are prepared, you should be able to install it quickly.
Why Should You Install a Toilet Bowl Yourself?
We will tell you a few reasons why it is so beneficial for you to install a toilet bowl yourself. You can feel accomplished that you did a home improvement yourself, and you will also save money on professional installation.
In addition to that, the procedure is less complicated, particularly with contemporary toilet styles that provide straightforward installment. Also, LS Plumber Singapore has decades of experience in services like tap leak repair, toilet bowl leaks, and instant water heater installation.Â
Process of Installing a Toilet Bowl
Step 1: Turn Off the Water Supply
You first need to go through the very necessary process of turning off the water supply to your toilet before heading on with the installation. Find the shut-off valve by the toilet, turn it clockwise to interrupt the water flow, then flush the toilet, emptying all the water from the tank and bowl. Dab the remaining water out of your bowl with a sponge or towel.
Step 2: Remove the Old Toilet
To replace an existing toilet, you’ll need to remove the old one. Unhook the water supply line and undo the nuts on the toilet bolts with an adjustable wrench. Rock the toilet back and forth to break the seal, lift it off, and set it aside. Scrape the old wax ring stuck between the flange and toilet horn with a putty knife.
Step 3: Install New Closet Bolts and Wax Ring
Check the flange for cracks or breaks once you have the old toilet out. However, if it is in good shape, you may need to install new closet bolts in the flange. We use these bolts to anchor the toilet bowl to the floor.
Then, set the new wax ring at the bottom of the toilet bowl. A wax ring is one of the few seals that prevent water from leaking on the floor by creating an airtight connection between the toilet and the flange.
Step 4: Position the Toilet Bowl
Gently lower the toilet bowl over the flange so that holes in its base align with the closet bolts. Place it straight down; placing the bowl at an angle could destroy your wax ring. Lower the bowl into the hole, and apply even and gentle pressure to seal.
Step 5: Secure the Toilet Bowl
After positioning the toilet bowl, secure it to the ground by tightening the nuts onto their closet bolts. Tighten the nuts using a wrench, and be careful not to over tighten them so you do not crack the ceramic bowl. With the bowl at the right angle, lock it in, clean up any remnants of bolt head sticking out, and cap the bolts for that finished look.
Step 6: Install the Toilet Tank
If the toilet tank is separate from the bowl, you will install it next. Place the tank on top of the back of the bowl, ensuring that the bolts align with holes in the bowl. Tighten the tank bolts in a cross pattern to keep the flapper flush to the seat. Use a level to check the tank’s alignment and make necessary adjustments.
Step 7: Connect the Water Supply Line
Hook the water supply line back to the tank and hand-tighten it before using a wrench for one full turn. Refrain from overtightening it, as over-tightening will damage the connection. After everything comes in place, turn the water supply back on and let the tank fill up.
Step 8: Test for Leaks and Adjustments
When the tank fills with water, flush the toilet several times to see if there are any leaks at the base of the bowl or on the water supply line. If it does, check for leaks and tighten the connections as necessary. Reconnect the water supply and check for leaks. If all is well, your new toilet bowl installation is completed.
Conclusion
The whole process of installing a toilet bowl can be a satisfying and cost-effective Home Improvement project. Now that you have this hands-on guide, you can also easily install a toilet bowl in your home.
Following the directions above and utilizing the right tools will help you install a toilet bowl smoothly and easily. And there you have it. Now, you can install your new toilet in your new home or renovate your bathroom.