In Singapore’s busy lifestyle, it is crucial to fix a leaky kitchen faucet immediately. A leaky kitchen faucet is a common problem in many homes. It may seem like a minor issue, but it can waste water and increase utility bills over time.
Moreover, where water conservation is important in Singapore. Therefore, fixing a leak quickly is essential and helps prevent unnecessary water loss. Fortunately, the process is simple and does not require professional plumbing skills. Follow this step-by-step guide to fix a leaky kitchen faucet.
How to Fix a Leaky Kitchen Faucet?
The process to repair a leaky kitchen faucet is quite simple if you follow the guidelines by LS Plumber Services Singapore. They also offer kitchen sink, bathroom flood repair, and urinal bowl services in Singapore. Let’s explore their guide:
1. Turn Off the Water Supply
Before you begin the process to fix a dripping kitchen faucet, shut off the water supply to the faucet. Look for the shutoff valves under the sink. Turn them clockwise to stop the water flow. If there are no shutoff valves, turn off the main water supply in your home. Open the faucet to release the remaining water in the pipes.
2. Plug the Sink Drain
Now begins the fun part to fix a dripping water kitchen faucet. Small parts like screws and washers can fall into the sink during the repair. To avoid losing them, plug the drain with a cloth. You can also use a sink stopper to avoid losing them. This ensures that nothing disappears down the pipe while working on the faucet.
3. Remove the Faucet Handle
The handle controls water flow, and a loose part inside it causes the leak. Use an appropriate tool to remove the screw holding the handle. The screw is usually under a small cap on the handle. After removing the screw, lift the handle off carefully.
4. Leaky Kitchen Faucet Repair
The type of faucet you have will determine the part that you need to fix.
- Cartridge Faucet: A faulty cartridge often causes leaks. After removing the handle, pull out the cartridge using pliers. Replace it with a new one of the same model.
- Compression Faucet: A worn-out rubber washer can also be the culprit. Remove the washer from the valve stem and replace it with a new one.
5. Check the O-Ring and Seal
If you want to fix a leaky kitchen faucet, O-rings and seals are the main things to check. A damaged O-ring and seal can also cause leaks. The O-ring is a small rubber ring inside the faucet. If it looks damaged, replace it with a new one. Use a plumber’s grease to lubricate the new O-ring before installing it.
6. Reassemble the Faucet
When all worn-out parts are replaced, put the faucet back together. Insert the washer, then reattach the handle with its screw. Ensure everything is properly fit in place. However, avoid overtightening, as this can damage the components.
7. Turn On the Water Supply
Open the shutoff valves under the sink or turn on the main water supply. Slowly turn on the faucet and check for any leaks. If water flows smoothly without dripping, the repair is successful.
8. Prevent Future Leaks
To avoid leaks in the future, maintain your kitchen faucet regularly. Do not turn the handle too tightly when shutting off the water. This is crucial to prevent wearing out the washer faster. Clean the faucet aerator occasionally to remove mineral buildup that can cause leaks. If the faucet is old or continues to leak after repairs, it is better to replace it with a new one.
Conclusion
In conclusion, you need to fix a leaky kitchen faucet immediately as you notice it. Fixing a leaky kitchen faucet in Singapore is simple with the right tools and steps. Start by turning off the water supply and checking the faucet’s internal parts.
You may also need to replace the worn-out parts to solve the problem. Regular maintenance helps prevent future leaks and ensures efficient water use. With the above instructions, you can repair a leaky kitchen faucet quickly and save water in your home.