How to Fix a Leaky Faucet in Singapore

Fix a leaky faucet with the help of this simple guide and prevent any extra charges to your water bill due to water wastage. Leaky faucets might seem like a minor inconvenience at first, but consistent leakage can greatly increase your water bill. Thus, leaky faucet repair becomes an important issue that needs to be handled as soon as possible. Fixing a leaky faucet is a straightforward task that you can easily manage on your own.

Today, we will discuss the step-by-step process to repair a leaky faucet on your own. Get your plumbing tools ready and let’s repair the leak.  Also, LS Plumber Singapore has decades of experience in services like tap leak repair, toilet bowl leaks, and instant water heater installation. 

Materials Needed

You are going to need some tools to help you in the repair process. You are going to need the following tools:

• Plumbing tape
• Adjustable wrench
• Pliers 
• Basin wrench
• Silicone sealant 
• Bucket 
• Rags or clean cloth 

How To Fix A Leaky Faucet:

Here is the step-by-step guide to fixing a leaky faucet yourself. 

1. Turn Off The Water Supply

The first step in the faucet leaking repair is turning off the water supply to the basin. For this purpose, you must tighten the supply valves under the sink. You can also turn off the water from the basin’s main water supply pipe.

Disconnect the water lines from the old faucet with an adjustable wrench. When you disconnect the water supply and remove the old faucet, have a bucket ready to catch any water that may drip from it. 

2. Disassemble The Faucet Handle

The next step in the leaky faucet repair is disassembling the handle. Use a screwdriver to remove the outer handle. Once the handle is off, look for a screw present under the handle, usually covered with a decorative cap. Once the handle is off, you should be able to see a valve underneath as well. 

3. Identify The Type Of Faucet

In the next step, you should identify the type of faucet in your bathroom or kitchen. Different faucets are available in the market, including compression, ball, cartridge, or ceramic disc faucets. Identifying the exact type of faucet is essential, as each type will have different working and fixing mechanisms. 

4. Replace The Damaged Part

Once you have identified the type of faucet, you can fix the leak. Usually, the leak is caused by a damaged part that needs replacing. 

For Compression Faucets – Check the rubber washer at the end base of the faucet valve. If it is worn or damaged, replace it with a new one. Ensure that the new washer is the same size as the original one. 

For Cartridge Or Ball Faucets – If the faucet is leaking from the sprout of the pipe, you will have to replace the entire cartridge or the ball mechanism. To fix water dropping faucet of any of these two types, remove the old part and install a new one according to the manufacturer’s instructions. Make sure that the new one matches the old mechanism and is of the same model. 

5. Reassemble The Faucet

Once you have replaced the damaged parts, you can reassemble the faucet by reversing the disassembly process. Don’t over-tighten the screws or the faucet itself, as it can damage the whole mechanism and lead to further leaks. 

Conclusion

We have discussed in detail the complete process for fixing a leaky faucet. The whole business is quite simple, and with the right materials, you can do the job in no time. However, some faucets and basins can be quite complex.

You can also seek the help of professional plumbing companies to fix leaky faucets in Singapore. Faucet repair and plumbing companies are present throughout the country and help with all sorts of plumbing issues. 

Frequently Asked Questions