How to Fix a Bathroom Sink Stopper in Singapore

A malfunctioning sink stopper can be a headache for many people, especially in busy bathrooms and kitchens; thus, knowing how to fix a bathroom sink stopper becomes essential. Sink stoppers are pretty sturdy and can last a long while.

However, like any other kitchen equipment, these stoppers can get broken or worn out. A stopper can also get jammed in the sink and refuse to come out. These non-functioning stoppers can interfere with the normal functioning of the drain. 

In this guide, we will discuss some easy ways to repair a bathroom sink stopper. You will need some plumbing tools and a patient approach to the repair process. Follow this guide along the repair process to ensure a smooth fix and avoid any hassle. Also, note that LS Plumber Singapore offers drain cleaning, clear floor top, and drainage pipe choke services.

How To Fix A Bathroom Sink Stopper 

Here is the step-by-step guide to fix a bathroom sink stopper in Singapore

1. Identify The Problem

You can run into many problems with the sink stopper. All these problems have different ways of fixing. Thus, you have to identify the exact problem your stopper has. Some common issues you can face with the stopper include 

• Jammed Stopper – The stopper can get jammed in the sink and cannot come outside. 
• Loose Stopper – A loose stopper doesn’t stay in its position and can come out when it is needed in place. 
• Leaking Sink – A waking sink can arise due to the stopper property not being in its place. The stopper can also be of the wrong size when this issue occurs. 

2. Gather Your Tools 

You are going to need some tools to go about the repair process, such as 

• Wrench
• Pliers
• Screwdriver
• Vinegar and baking soda for cleaning 
• Replacement parts, if needed

3. Fix The Stopper According To Its Type 

Depending on the type of stopper, the exact fix can vary. The methods to repair a stopper are 

i. Pop Up Stopper 

The steps to repair a pop-up stopper inside 

ii. Fixing The lift Rods 

Inspect the pivot rods and the lift rods of the stopper. If the stopper is jammed or loose, there might be a problem with the lift rods. If the lift rod is loose, use a screwdriver to tighten it to the stopper. 

iii. Clean The Pivot Rod Mechanism 

Check the mechanism of the pivot rod by removing the screw under the sink. Once the mechanism is open, clean the pivot rod and remove any dirt or grime buildup or any other thing blocking the stopper in its place. 

iv. Reassemble 

Reattach both the pivot and lift rods once you have cleaned them. Tighten both rods using screwdrivers and check the mobility of the stopper. 

4. Lift And Turn Stopper 

• Remove The Stopper 

The lift and turn stopper has a thread that can be pulled to remove the stopper from its position. Turn the stopper counterclockwise and lift it from its place. 

• Inspect And Clean The Threads 

Once the stopper has been removed, inspect the thread and the stopper for any signs of dirt, debris, or grime. Make sure to remove any blockages that can interfere with the smooth function of the stopper. 

• Reinsert The Stopper 

Reinsert the stopper after cleaning and repairing it. Put the stopper in the sink and turn it clockwise to tighten it in its position. 

5. Push And Pull the Stopper 

A push-and-pull stopper is opened and closed by pushing it inside and outside the sink. Here is how to fix such a stopper.

1. Remove The Stopper 

Pull the stopper up and turn it counterclockwise to release it from its position. 

2. Clean And Inspect 

Once the stopper has been removed, you can inspect the O-rings and the rubber seals to ensure they are intact and free of any blockages or other material.

3. Reinstall The Stopper And Test It 

Once you have cleaned the stopper and ensured the proper functioning of its seals, push it back into its place and test it by filling the sink with water. 

General Maintenance Tips 

• Use a plunger and a wire to clear the clogs or any material buildup if the water drains slowly.
• Regularly clean the sink and the stopper area with vinegar and baking soda to remove any resistant stains or clogs. 
• Replace any worn-out parts like O-rings, washers, or pivot rods. 

Conclusion 

We have discussed the complete process to fix a bathroom sink stopper in detail. First, you will have to identify the type of stopper you have. Depending on the type, the fixing and cleaning methods will be different. For pop-up stoppers, you must remove the stopper by popping it out of the sink and lifting it from its lift rods. Clean it and put it back in its place.

Remove lift and turn stoppers by turning them counterclockwise and cleaning them. Remove a push and pull stopper in the same way and clean and inspect its components. You can also take the help of professional plumbers to fix a bathroom sink stopper in Singapore.

Frequently Asked Questions